BATERAI HAZE HZB12-100

  • Berat: 28,80 kg
  • Availability: In Stock

Haze produce some models - AGM battery construction is as shown in the diagram below. The positive and negative grids are cast from acalcium / tin lead alloy to reduce grid growth and corrosion. The active material is manufactured from high purity lead (99.9999%) to minimise the negative effects of impurities.Separator is a mat of random woven acid resistant glass fibres, which acts as a sponge - soaking up and immobilising the electrolyte whilst maintaining good acid to plate contact and availability during discharge. “S wrapping” is employed to eliminate the risk of short circuits due to mossing and debris at the bottom of the cell.The purpose of the separator is to maintain a constant distance between the positive and negative plates, thus removing the possibility of short circuits whilst allowing the active material to fully react with the electrolyte. The random weaving also results inan open structure, which offers minimal resistance to the flow of electrolyte during filling.

BATTERY SPECIFICATIONS :
Description:HAZE HZB12-100
Nominal Voltage:12 Volts
Nominal Capacity:100 Ah (C20 @ 20 C)
Design Life:12 Years
Operating Temperature:-20 C to 50 C
Dimension (LxWxH):306 x 168 x 211 mm
Weight:28.8 Kg
Grid Alloy:Calcium / Tin lead alloy
Plates:Flat Pasted
Separator:Microporous polymer
Active Material:Very high purity lead
Case and Cover:ABS (VO on request)
Charge Voltage:Float 2.25 - 2.30 VPC @25 C Cycliing 2.35 @25 C. Max. 2.4 VPC Max ripple 0.05C (A)
Electrolyte:Gelled Sulphuric acid Analytical grade purity
Venting Valve:EPDM Rubber 1.5 to 2 psi (10.5 - 14 KPa) release pressure. Resealing at 1 psi (7 KPa)
Terminal:Insert 12mm Dia M5 thread. Epoxy sealed by extended mechanical paths